Company logo
Installation and Operating InstructionsSearchTable of contentsHome
 
Basic control principlesInitial start-upTerminal for automatic section control
 
 
Terminal for automatic section control
 
Most important settings
Setting
Where?
Commentary
Select the GPS driver (optional).
 Service_color / Driver / GPS
The standard driver works in most cases for the receivers sold by ME. However, to change the correction signal, a fitting driver for the GPS receiver must be activated.
Enter the tractor geometry and activate the tractor profile.
 Tecu / Settings
Connecting the job computer to the ISOBUS.
 
 
Job computer profile in SECTION-Control
 TRACK-Leader / Settings / SECTION-Control
Search for a profile and set the “Machine model” parameter.
For more precise operation, configure all of the other parameters in the profile.
 
 
 
Procedure
 
 
 
þ
The “ISOBUS-UT”, “TRACK-Leader” and “SECTION-Control” licenses are activated.
1.
Insert the ISOBUS cable into the ISOBUS rear socket.
2.
Switch on the terminal.
3.
Wait until the job computer application has copied all of the relevant data on the terminal.
4.
 TRACK-Leader - Open the TRACK-Leader application using the selection menu.
5.
Configure the settings from the table above.
6.
Start a new navigation.
 
 
You can read how to proceed in the operating instructions for TRACK-Leader.