Sections are switched via SECTION-Control.

 

The SECTION-Control application has closed all sections.

Examples for the cause:

Other causes are also possible.

 

Beacon is switched on.

 

The working lights are switched on.

 

Nozzle lighting is switched on.

  (flashing)

Stirrer has been stopped. Cause: Fill level is too low.

  (not flashing)

Stirrer has been stopped. Cause: Stopped by the driver.

 

Stirrer is working.

 

Fresh water is being filled into the main tank.

 

Fresh water is being transferred.

 

Tank internal cleaning is activated.

 

Ring line function is activated.

 

Left fan switched on.

 

Middle fan switched on.

 

Right fan switched on.

 

Main valve is open (only appears if the main valve was switched on manually).

 

Air compressor switched on.

 

Mixing hopper is being lifted.

 

Mixing hopper is being lowered.

 

Boom height sensor activated.

If a boom height sensor is not switched (insufficient height of the boom), the air cushions and fan cannot be operated.

 

The oil level is too low.

 

The chassis settings are activated.

 

Sliding axle is being extended.

 

Sliding axle is being retracted.

 

The implement is being sloped to the left.

 

The implement is being sloped to the right.

 

Currently selected product. The currently selected product is identified with a number or a name.

 

Automatic folding is switched on. The automatic sequence is currently active.

 

Automatic folding is switched off. The automatic sequence is currently inactive.

 

In the automatic sequence, the next step is to fold on the left, and the step after that is to unfold on the left.

 

In the automatic sequence, the next step is to fold on the right, and the step after that is to unfold on the right.

 

In the automatic sequence, the next step is to unfold on the right, and the step after that is to fold on the right.

 

In the automatic sequence, the next step is to unfold on the left, and the step after that is to fold on the left.

 

In the automatic sequence, the next step is to fold on the left and right, and the step after that is to unfold on the left and right.

 

In the automatic sequence, the next step is to unfold on the left and right, and the step after that is to fold on the left and right.

 

No connection to the weather station.

 

Additional function A is activated.

 

Additional function B is activated.

 

Additional function C is activated.

 

Additional function D is activated.

 

Output in litres per minute

 

Area output per hour

 

Tank fill level

 

The output per minute measured by the flow meter is too low compared to the output calculated by the pressure sensor.

 / 

Fan speed

 / 

Pump speed

Can also be used to indicate whether a pump is switched on or off.