SLURRY-Controller MIDI 3.0 - Filling the slurry tanker

Instructions MIDI 3.0

Table of contents

Filling the slurry tanker

Path

This is how you reach the screen with this function:

FS_Befüllung_Einstellungen

> (

FS_weiter_zurück

)

You have 2 options for filling the slurry tanker:

▪: Using a configured sequence

: A sequence defines which functions of the slurry tanker are performed during the filling procedure and for how long.

▪: Manual

: You must manually activate all of the functions for filling the slurry tanker.

Filling using a sequence

Procedure

þ: A sequence is configured.

1.: - Ensure that you are not in manual filling mode.

⇨: The following icon may not appear in Area 1:

2.: Select a filling mode.

3.: - Start filling.

⇨: You can see the current status by the icons: for Filling started and for Filling stopped.

⇨: All of the pre-set functions are activated successively.

4.: - Stop filling after the end of the sequence.

⇨: You have filled the tank using a pre-set sequence.

1.: - Optionally, you can now set the tank content manually to the maximum level.

Manual filling

Procedure

1.: - Activate the manual filling mode.

⇨: The following icon appears in Area 1:

2.: Select a filling mode.

3.: - Start filling.

⇨: You can see the current status by the icons: for Filling started and for Filling stopped.

4.: Depending on the equipment of the slurry tanker, perform the following functions:

▪: Moving the filling arms

▪: Using a folding sequence for filling arms

▪: Opening and closing the valves

▪: Increasing the filling speed

▪: Chopping up foreign objects in the slurry

Further information

•: Moving the filling arms

•: Opening and closing the valves

•: Increasing the filling speed

•: Chopping up foreign objects in the slurry