Layout of work screen
The work screen is the first screen that appears when the application is opened. During operation, the work screen always appears in the foreground and contains the most important information on the work and the status of the slurry tanker.
The work screen is divided into 3 areas.
The information and number of icons in each area depends on the equipment and activated functions of the slurry tanker.
Area 1
- The current application rate.- ▪
-
- The current target rate. If you adjust the target rate during operation, you will see the adjustment 
and then the new target rate 
.
- The current speed of the slurry tanker.
- The current tank content.In addition, the icon shows the current mode of the slurry tanker.
- The slurry tanker is working with a defined target rate.
- The slurry tanker is working without a defined target rate.
- The slurry tanker is working without pre-set sequences.
- The slurry tanker is currently performing the application.
- The slurry tanker is not currently performing the application.- ▪
-
- The tank is activated, but the slurry tanker is currently not spreading because SECTION-Control is deactivated.
- Sections are switched via SECTION-Control.
- The SECTION-Control application has closed all sections.Area 2
Overviews of the individual icons that may appear in Area 2 can be found in the sections on the Operation and Configuration of the slurry tanker.
Area 3
- The current flow rate.Controls
Use the following function keys to operate the function:
