Anbau- und Bedienungsanleitung - Parameters for the GPS receiver

Parameters for the GPS receiver

Baud rate

Only appears when the "Standard" driver is selected.

Setting for the speed at which the GPS receiver sends data to the terminal. The parameter sets the baud rate for the terminal.

Satellite 1 and Satellite 2

Satellite 1 – primary DGPS satellite. The DGPS receiver will connect to this satellite in the first instance.

Satellite 2 – secondary DGPS satellite. The DGPS receiver will only connect to this satellite in the event that the primary satellite fails.

Your satellite selection will depend on which satellite currently has the best availability in your region.

Possible values:

▪: "Auto"

: The software automatically selects the current best satellite. This setting is not recommended, as it slows down the start-up of the DGPS receiver.

▪: Name of the satellite. Which satellites are shown here is dependent on the driver and correction signal that you have activated.

Steering

This parameter activates the "Automatic steering" assistance function in the GPS receiver.

If you want to connect your existing GPS receiver to a steering job computer, you have to configure the "Steering" parameter.

Possible values:

▪: "On"

: Activates automatic steering assistance.

▪: "Off"

: Deactivates automatic steering assistance.

Correction signal

Type of correction signal for the DGPS receiver.

The correction signals which are available is dependent on the activated driver.

Possible values:

▪: For the "A100, A101" driver:

–: "WAAS/EGNOS"

: Correction signal for Europe, North America, Russia and Japan.

–: "E-DIF"

: Internal calculation of correction data.

: Only functions with a special version of the A100 DGPS receiver, item no. 30302464. This receiver is no longer sold by Müller-Elektronik.

▪: For the "AG-STAR, SMART-6L" driver

: When a AG-STAR DGPS/Glonass receiver is connected:

–: "EGNOS-EU"

–: "WAAS-US"

–: "MSAS-JP"

–: "EGNOS-EU + GL1DE"

–: "WAAS-US + GL1DE"

–: "MSAS-JP + GL1DE"

–: "GPS/Glonass GL1DE 1"

–: "GPS/Glonass GL1DE 2"

: When a SMART-6L DGPS/Glonass receiver is connected:

–: EGNOS/WAAS

–: EGNOS/WAAS + GL1DE

–: GL1DE

–: RTK radio (RTK license required )

–: RTK GSM (RTK license required)

Correction signal format

Format of correction signal for the SMART-6L DGPS/GLONASS receiver.

Only appears when "RTK radio" or "RTK GSM" correction signals have been selected.

Possible values:

▪: RTCM V3

▪: CMR/CMR+

▪: RTCA

For the correction signal format which you must select, please refer to your correction service.

Terrain compensation

The GPS TILT-Module terrain compensation is configured using this parameter.

You can order the terrain compensation from Müller-Elektronik with the following item number: 30302495.