Activating and deactivating fields
Procedure
You can activate a field as follows:
- þ
- In the “Virtual ECU” application, you have activated the virtual job computer for the implement to be used or you have connected an ISOBUS job computer.
- þ
- Operating mode of ISOBUS-TC: Standard
- Open the ISOBUS-TC application.- 2.
- Tap “Fields”.
- ⇨
- A list with already created fields appears.
- 3.
- Tap the entry with the field to be processed.
- Activate the field.
- Open the TRACK-Leader application.- 6.
- Start a new navigation.
- ⇨
- The terminal loads all of the data from the storage: Field boundaries, guidance lines, tracks.
- ⇨
- In doing so, the terminal also takes account of which job computer was used to process the field. Therefore, if you work on the field two consecutive times with the field sprayer, the tracks for the field sprayer will be loaded the second time. However, if you work on the field with a fertilizer spreader, the tracks for the fertilizer spreader will be loaded.
- 7.
- Depending on which machine you are working with, you can create or select a suitable guidance line set in TRACK-Leader. More information on guidance line sets can be found in the instructions for TRACK-Leader.
If you want to rework the field, you must go to the “Storage” menu in TRACK-Leader and delete the tracks there with 
.
.Procedure
To finish the work:
- þ
- The navigation screen is called up in TRACK-Leader.
- þ
- You have worked the field in TRACK-Leader. On the screen, you can see the field with field boundary, guidance lines and other field data.
- Terminate the navigation in TRACK-Leader.- 3.
- Tap “Fields”.
- 4.
- Tap the entry with the field that was just processed.
- Deactivate the field.- ⇨
- The field will be deactivated. In the process, it will also be saved with all of the current field data. With the next activation, the data will be automatically loaded again.