Anbau- und Bedienungsanleitung - Terminal for task management

Terminal for task management

You can always use ISOBUS-TC task management, regardless of whether you are driving in parallel, switching sections or simply operating an ISOBUS job computer. However, the most important settings mentioned in the previous sections must be made for each of these applications.

Important for ISOBUS-TC:

▪: Always remember to start and stop the tasks.

▪: After finishing work, you must save all of the tasks on the USB memory device (log out the USB memory device) before you remove the USB memory device or transmit new tasks onto the terminal.

Most important settings

Setting	Where?	Purpose
Set the operating mode to “Extended”.	/ Settings	Activates and deactivates task management in the ISOBUS-TC application. If you do not want to create tasks, set the operating mode to “Standard”.
Insert the USB memory device with task data or create tasks without a USB memory device.

Procedure

þ: The “ISOBUS-TC” licence is activated.

1.: Switch on the terminal.

2.: - Open the ISOBUS-TC application using the selection menu.

3.: Insert a USB memory device with task data.

4.: Start a task.