Anbau- und Bedienungsanleitung - Changing the driver for the GPS receiver

Changing the driver for the GPS receiver

Upon delivery, the “Standard” driver is activated on the terminal. You must change this driver if you want to reconfigure the GPS receiver, for example, to change the correction signal. In this case, you must select a driver that is fitting for the GPS receiver.

Available drivers

Driver name	GPS receiver
deactivated	No GPS receiver is connected.
A100, A101	Drivers for the A100 and A101 GPS receivers, if they are connected to the serial interface.
AG-STAR, SMART-6L	Drivers for the AG-STAR and SMART-6L GPS receivers, if they are connected to the serial interface.
PSR CAN	Select this driver if the GPS receiver is connected to the PSR steering job computer. PSR is a steering job computer by the Reichhardt company. The signals are transmitted to the terminal through the CAN cable. The receiver will be configured directly in the PSR application. Please note that you cannot use this driver together with an external lightbar.
Standard	Drivers for unknown GPS receivers, if they are connected to the serial interface. This driver is activated by default. The connected GPS receiver cannot thus be configured.
TRACK-Leader AUTO®	Select this driver if a GPS receiver is connected to the TRACK-Leader AUTO® steering job computer. Please note that you cannot use this driver together with an external lightbar.
AG-200, NAV-900	Driver for the GNSS receivers AG-200 and NAV-900. If the AG-200 is connected to the serial interface or if the NAV-900 is connected to the Ethernet interface.

	NOTICE
	Incorrect driver Damage to the GPS receiver. 1. Before connecting a GPS receiver to the terminal, you must always activate the appropriate driver.

Procedure

To activate the driver:

1.: - Open the “Service” application.

2.: Tap "Driver".

3.: Tap “GPS”.

⇨: The installed drivers appear.

4.: Tap the appropriate driver.

5.: - Confirm.

6.: Restart the terminal.