Anbau- und Bedienungsanleitung - Connecting the camera NQ

Installation and Operating Instructions

Table of contents

Connecting the camera NQ

Kamera NQ - Anschluss an Touch1200 - 3030249400

Camera with adapter cable

	Connector for connection to the terminal. Port D		Camera
	Connector for the adapter cable		Camera connector
	Connector for the extension cable		Connector for the camera plug

Procedure

1.: Connect the cables to each other as shown in the figure. Pay attention to cable lengths when doing so.

2.: CAUTION! When laying out the cable, ensure that there are no kinks in the cable and that no one can stumble over the laid-out cable.

3.: Lay out the cable. Ensure that the cable reaches the terminal and is not pulled out during operation.

4.: Attach the cable with the provided cable ties.

5.: Secure the camera. Use the white cardboard drilling template from the quick start guide for this purpose.

6.: Connect the camera to the terminal. Use connector D to do this.

7.: Activate the camera.

8.: When disconnecting the cable from the terminal, use the enclosed rubber gasket to seal the exposed connector.