Calibrating the angle sensors on the wings
You must calibrate the angle sensors for the wings so that the software can precisely determine when the wings are in a certain position.
During the calibration, you must actuate the following positions:
- ▪
- “Folded”
- The wings are completely folded.
- ▪
- “Unfolded”
- The wings are completely unfolded.
- ▪
- “Intermediate point 1”
- The wings are at intermediate point 1 between folded and unfolded.
- ▪
- “Intermediate point 2”
- The wings are at intermediate point 2 between folded and unfolded.
Procedure
> 
- ⇨
- The “Options” screen appears.
- Open the screen for the sensors on the wings.- ⇨
- The “Wing sensors” screen appears.
- Open the calibration screen.- ⇨
- The “Calibration” screen appears.
- 4.
-
- Select the wing you want to calibrate. You can calibrate both wings simultaneously or only one.
- ⇨
- The selected wing(s) are marked in colour on the screen.
- 5.
- Select the wing position you want to calibrate.
/
- Fold the wings to the selected position.
- Save the position. Alternatively, you can abort the calibration with 
.- 8.
- Select the next wing position you want to calibrate.
- 9.
- Repeat the steps until all four wing positions have been calibrated.
- Exit the screen.- ⇨
- The “Wing sensors” screen appears.
- ⇨
- You can enter tolerance values for the four calibrated wing positions.
- 11.
- Select the first wing position.
- 12.
- Select the unit for the tolerance.
- 13.
- Enter the desired tolerance.
- 14.
- Repeat this procedure for all wing positions.
- ⇨
- You have calibrated the angle sensors on the wings.