“Pump” parameter
When the pump speed is higher than the maximum permitted pump speed, an error message appears. This allows drivers to have better control of their work and prevent the pump from being damaged when the speed is too high.
The parameter includes two values:
- ▪
- Set pump speed.
- Indicates the currently set maximum pump speed.
- ▪
- “Target”
- Used to change the maximum pump speed.
Procedure
To save the current pump speed as the maximum permitted speed:
> 
> 
- 2.
- Highlight “Set value” line.
- 3.
- Run the pump speed up to the desired value.
- ⇨
- The current pump speed will be shown on the “Set value” line.
- Press.- ⇨
- The pump speed from the “Set value” line appears on the top line. In this way it has become the maximum permitted pump speed.