Sections are switched via SECTION-Control.

 

The SECTION-Control application has closed all sections.

Examples for the cause:

Other causes are also possible.

 

Beacon is switched on.

 

The working lights are switched on.

 

Nozzle lighting is switched on.

  (flashing)

Stirrer has been stopped. Cause: Fill level is too low.

  (not flashing)

Stirrer has been stopped. Cause: Stopped by the driver.

 

Stirrer is working.

 

Fresh water is being filled into the main tank.

 

Fresh water is being transferred.

 

Tank internal cleaning is activated.

Low-pressure cleaner is being used.

High-pressure cleaner is being used.

The ring line is being rinsed.

 

Mixing hopper is being lifted.

 

Mixing hopper is being lowered.

Nozzles used in Vario mode.

Nozzles used in Select mode.

Nozzle cleaning activated.

Intended drop size with Airtec or in Vario mode.

 

Pump switched on.

 

Pump switched off.

 

Fan switched on.

 

Fan switched off.

Permanent tank internal cleaning is activated.

Filter rinsing is activated.

Filter rinsing is activated and being used.

Compressed air rinsing is being used.

The support leg is being lowered.

The support leg is being raised.

 

The corresponding unit of the Raven injection system is active.

 

The corresponding unit of the Raven injection system is deactivated.

 

The corresponding unit of the Raven injection system is not connected or not ready for operation.

CURVE-Control is activated.

 

Wind strength

 

Output in litres per minute

 

Area output per hour

 

The output per minute measured by the flow meter is too low compared to the output calculated by the pressure sensor.

 / 

Fan speed

 / 

Pump speed

Can also be used to indicate whether a pump is switched on or off.