Starting application
Procedure
To start the application:
- þ
- The tractor with the field sprayer is on the field.
- þ
- You have configured the job computer.
- þ
- You have folded out the boom.
- 1.
- Ensure that all prerequisites have been fulfilled.
- Start application- ⇨
- In manual mode:
The field sprayer starts the application.
- ⇨
- In automatic mode:
The sprayer will be prepared for application.
As long as the sprayer is not moving, the following icon appears on the work screen, depending on the “Sprayer off below:” parameter:
- 3.
- If you are in automatic mode, start driving and exceed the minimum speed for the automatic regulation (parameter: “Regulation off below”).
- ⇨
- As long as the field sprayer is not regulating, the following icon appears on the work screen, depending on the “Regulation off below:” parameter:
- ⇨
- As soon as the minimum speed is exceeded, the field sprayer starts regulating.
- ⇨
- You have started application.
Immediate application
There may be situations where you want to start spraying while the sprayer is still at a standstill. For example, when you have stopped on the field.
To start immediate application in automatic mode:
- þ
- The tractor with the field sprayer is on the field.
- þ
- You have configured the job computer.
- þ
- You have folded out the boom.
- þ
- Automatic mode is activated.
- 1.
- Press and hold the application button on the joystick for three seconds.
- 2.
- Start driving within 5 seconds and exceed the minimum speed for the automatic regulation (parameter: “Sprayer off below”). Otherwise, the application will be automatically terminated.