Entering the geometry
The geometry of an agricultural implement is defined as a series of parameters describing its dimensions.
The geometry is important particularly for all systems that are GPS-controlled.
The distances you enter depend on whether the implement is towed, mounted on the tractor or self-propelled.
Procedure
> (
) > 
- ⇨
- The “GEOMETRY” screen appears.
- ⇨
- On the screen, you can see which measurements need to be taken and where they can be entered.
- 2.
- Enter the measured values. With mounted implements that have a boom that is not straight, but rather curved towards the front, you must enter the values for the individual sections. With
and 
, you can switch between the sections.
- Optionally, you can change the name of the mounted implement.
- Optionally, you can call up the “- 5.
- Configure the parameters
- ⇨
- You have configured the geometry.
Further information