Operating the hydraulic system with the job computer
The Müller-Elektronik job computer is used to adjust the position of the hydraulic valves so that the oil pressure is routed to specified parts of the seeder.
When operating the seeder with the job computer, remember that the job computer cannot control the oil pressure.
You have to use the control unit in the tractor to generate pressure in the system.
Example
Operation with these systems can then look like this:
- 1.
- Press a function key on the on-board integrated display/controller. For example,
for the left-hand bout marker.
- ⇨
- The function icon appears on the work screen. This confirms that the hydraulic valve is ready and this function can now be controlled hydraulically.
- 2.
- Actuate the control unit of the hydraulic system in the tractor that is responsible for the bout marker.
- ⇨
- The pressure builds up.
- ⇨
- The left bout marker is lowered.
- 3.
- If you now remove the pressure from the valve, the left-hand bout marker will be lifted.
- ⇨
- The function icon must appear on the work screen, both when you lower the bout marker and when you lift it.
The following sections explain which hydraulic functions can be operated with the job computer.
Further information