Company logo
InstructionsSearchContentsHome
 
Configuring the on-board integrated display/controller for workSelecting and configuring the speed sourceEntering the simulated speed
 
 
Entering the simulated speed
 
To test the proper functioning of a sensor, you can simulate a speed.
 
 
CAUTION
Injury caused by working machine
If the function is activated when the implement is at a standstill, the driver can activate functions that can otherwise only be activated during travel. This can cause injury to persons standing close to the implement.
1.
Make sure that no one is close to the implement.
 
 
 
Procedure
 
 
 
1.
On the work screen, press:
 FS_Einstellungen >  FS_Nächste Seite > ( FS_Nächste Seite )
⇨
The "Settings / Speed" screen appears.
2.
In the "Speed Source" parameter, select the value "Simulation".
3.
In the "Sim.Speed" parameter, enter the speed to be simulated.
⇨
The desired speed will be simulated.
⇨
When you restart the job computer, the simulated speed will automatically be set to the value "0".