Anbau- und Bedienungsanleitung - Connecting sensors to the terminal

Connecting sensors to the terminal

The terminal provides you with the possibility of connecting a sensor or the tractor's 7-pole signal socket to port B. This allows you for example to use the working position signal in the TRACK-Leader parallel guide.

Most sensors which can be purchased from Müller Elektronik are fitted with a round 3-pole plug. In order to connect this to the terminal, you will need an adapter cable. A different adapter cable is needed for each hardware version of the terminal.

Adapter cable by hardware version

Hardware version of the terminal	Adapter cable	Connection	Item number
From 3.0.0	3-pole plug	Adapter cable, 9-pole bushing to 3-pole	31302499
From 1.4.1	3-pole plug	Adapter cable, 9-pole socket to 3-pole	31302497

You can also connect the terminal to the signal socket.

Cable to the signal socket

Hardware version of the terminal	Connections	Connection	Item number
From 3.0.0	7-pole to 9-pole socket	Cable direct to the signal socket Transfers the speed, PTO revolution, working position.	30322548
All	3-pole (from the adapter cable, dependent on the hardware version) to 7-pole.	Cable to the signal socket Only transfers the working position.	313008