Activating the GPS receiver
In order to enable the GPS receiver, you must first select the driver for the connected receiver.
A driver is a small program that controls connected device. The drivers for the devices supplied by Müller-Elektronik are pre-installed on the terminal.
Available drivers
| |
| No GPS receiver is connected. |
| Select this driver if the GPS receiver is connected to the job computer PSR. The signals are transferred via the CAN cable to the terminal. The receiver will be directly configured in the PSR application. |
| Driver for the Müller-Elektronik A100 and A101 GPS receivers. For receivers which are connected to the serial interface. |
| Driver for unknown GPS receivers. For receivers which are connected to the serial interface. This driver is activated by default. The connected GPS receiver cannot thus be configured. |
| Driver for the Müller-Elektronik AG-STAR and SMART-6L GPS receivers. For receivers which are connected to the serial interface. |
| | |
Incorrect driver Damage to the GPS receiver.
- 1.
- Before connecting a GPS receiver to the terminal, you must always activate the appropriate driver.
|