Anbau- und Bedienungsanleitung - Configuring the GPS receiver

Configuring the GPS receiver

The GPS receiver can be configured differently for various terminals. You can find out how to do this in the operating instructions for the terminal.

The following tables show the values which you can select in the parameter “correction signal” during configuration:

Europe

Value	Used satellites and correction signals	Advantages	Accuracies
EGNOS-EU	▪ 12 GPS satellites ▪ 2 EGNOS correction signals		▪ P-t-P: 15 cm ▪ Abs.: 70cm
EGNOS-EU + GLIDE	▪ 12 GPS satellites ▪ 2 EGNOS correction signals ▪ Internal GLIDE correction signal	▪ The internal correction further increases path-to-path accuracy.	▪ P-t-P: <15 cm ▪ Abs.: 70cm

North America

Value	Used satellites and correction signals	Advantages	Accuracies
WAAS-US	▪ 12 GPS satellites ▪ 2 WAAS correction signals		▪ P-t-P: 15 cm ▪ Abs.: 70cm
WAAS-US + GLIDE	▪ 12 GPS satellites ▪ 2 WAAS correction signals ▪ Internal GLIDE correction signal	▪ The internal correction further increases path-to-path accuracy.	▪ P-t-P: <15 cm ▪ Abs.: 70cm

Japan

Value	Used satellites and correction signals	Advantages	Accuracies
MSAS-JP	▪ 12 GPS satellites ▪ 2 MSAS correction signals		▪ P-t-P: 15 cm ▪ Abs.: 70cm
MSAS-JP + GLIDE	▪ 12 GPS satellites ▪ 2 MSAS correction signals ▪ Internal GLIDE correction signal	▪ The internal correction further increases path-to-path accuracy.	▪ P-t-P: <15 cm ▪ Abs.: 70cm

Worldwide

Value	Used satellites and correction signals	Advantages	Accuracies
GPS/GLONASS GLIDE 1	▪ 10 GPS satellites ▪ 4 GLONASS satellites ▪ Internal GLIDE correction signal	▪ Higher number of available satellites. ▪ The internal correction increases path-to-path accuracy.	▪ P-t-P: 25cm ▪ Abs.: 150cm
GPS/GLONASS GLIDE 2	▪ 8 GPS satellites ▪ 6 GLONASS satellites ▪ Internal GLIDE correction signal	▪ Higher number of available satellites. ▪ The internal correction increases path-to-path accuracy.	▪ P-t-P: 25cm ▪ Abs.: 150cm

P-t-P = path-to-path accuracy

Abs. = Absolute accuracy

Information for GLIDE

If you have selected a correction signal with GLIDE, please note:

▪: After starting the systems each time, it takes ca. 5 minutes until the system is ready for operation. Wait on the field to be worked during this time, before you start working.

▪: Ensure that the GPS receiver does not lose the GPS signal during work. (e.g. due to shadowing by buildings or trees). If the signal gets lost, it can cause the GLIDE to restart. This can lead to track offset.